Main BIOS image with an uninformative name that identifies no brand, model or board, only that it is a main flash dump. The file is a 2.00 MB binary, matching a 16 Mbit SPI chip. Its source must be established before use, so compare it with a read from the target board. When programming it with a CH341A or similar tool, save the original contents first, confirm the motherboard matches, and make sure the chip capacity equals the image size to avoid a failed or partial write.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →