ThinkPad T470 BIOS dump labelled late display, with the Intel Management Engine region cleared, as the ClrMe suffix suggests. The late-display tag points to a unit where the panel lit up only after a delay, so the image was likely kept as a fix for that symptom. The cleared ME lets the firmware rebuild its configuration on first boot. At 16 MB it targets a 128 Mbit SPI chip. Back up the original chip before flashing, and expect the first startup to take longer while ME reinitialises.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @anztechnology. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →