BIOS image for the t628 Thin Client, marked test ok, meaning the uploader reports it working. The file is an 8 MB binary, intended for writing to the SPI flash chip of that thin client with a programmer when the unit no longer boots or the firmware is corrupted. No board revision or version is given, so compare the image with your hardware before use. Back up the existing chip, check that its capacity is 8 MB, and verify the write after flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @vinafix_bios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →