Firmware for the TCL LED32T3540 television on the T.MSD309.B71T main board, intended for a 25Q32 flash chip. A 25Q32 is a 32 Mbit, or 4 MB, SPI device, so the extracted image should be that size. It is used to recover a TV stuck on the logo, rebooting or not starting. Read and keep the original contents before programming. Check that the board number and panel match, since a mismatched dump can give a wrong picture or no backlight.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @hashmielecom | 13 Jun 2023 | Open file on RM Schematics |
| @tvsoftwareworld | 11 Apr 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →