Firmware dump for the TP-Link TD-W8151N ADSL router, hardware version 3.1, with a Ralink RT63363E processor and a Winbond W25Q16 flash chip, marked as tested OK. The W25Q16 is a 16 Mbit (2 MB) SPI part, so a full image should be 2 MB. Write it with an SPI programmer to recover a router stuck in a boot loop or without a web interface. Check that the hardware version on the label matches, and read the original flash first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 24 Jan 2021 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 27 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →