TD-W8901G firmware for hardware version 3, labelled with the date code 100901, apparently a September 2010 build. Delivered as a 1.03 MB ZIP archive containing the upgrade image. V3 hardware differs from V2 and V6 boards, so the version printed on the router sticker must match before the file is used. Upload it from the management page; when the device is bricked, a serial connection to the board or programming the flash chip directly is the usual fix, after dumping the existing content.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (9)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 7 Jun 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 7 Jul 2020 | Open file on RM Schematics |
| @one5technology | 21 Nov 2020 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @skclappybios | 10 Apr 2024 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 27 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →