Firmware dump for the TP-Link TD-W8901N ADSL modem router, hardware version 1.0, marked in the name as tested and working. Technicians use full flash dumps like this to revive a router bricked by a failed update, usually by writing the image to the flash chip with a programmer or through a serial console. Confirm the hardware version on the device label first. Back up the current flash, and check the image size matches the chip capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (8)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 17 Nov 2020 | Open file on RM Schematics |
| @biositechyangiyer | 2 Dec 2020 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 27 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →