Backup of the TD-W8961N router firmware for hardware revision 2.0, labelled as a good working copy and stored in a 1.54 MB RAR archive. A full flash backup like this is used to restore a TP-Link unit whose firmware is corrupted, typically by desoldering or clipping onto the SPI chip and writing the image with a programmer. Match the hardware revision on the device label, read and keep the current chip contents before overwriting, and be aware that a full dump may also restore the original MAC and configuration data.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (11)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 7 Dec 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 8 Dec 2020 | Open file on RM Schematics |
| @biositechyangiyer | 23 Dec 2020 | Open file on RM Schematics |
| @nityatechnology2020 | 29 Jul 2021 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @skclappybios | 10 Apr 2024 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 27 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →