Firmware dump for the TP-Link TD-W8961ND wireless ADSL2+ router, hardware version 3, supplied as a 1.25 MB RAR without a named flash chip. Look up the marking on the board's SPI flash and make sure the extracted image size matches it before programming. Repair use is recovering a unit whose bootloader or firmware was damaged by a failed upgrade or power loss. Read and keep the original chip contents first, then write and verify with an SPI programmer, and confirm the label shows V3.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 23 Dec 2020 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 27 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →