Raw 4 MB flash dump for a Technosat satellite receiver identified as GS2, based on the GX6605S chipset and marked T1 version 2.0. The GX6605S is a Nationalchip SoC widely used in low-cost DVB-S receivers. Write the image to the SPI flash with a programmer such as a CH341A to recover a receiver stuck on boot or showing a blank display. Check that the board marking and version match, read and keep the original memory first, and confirm the chip is 4 MB so the image fits.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →