Firmware archive for the Tenda D301 ADSL modem router, hardware version 2, packed as a 7.64 MB RAR. A file like this is used to recover a router stuck in a boot loop or bricked by a failed update. It is written either through the bootloader recovery mode or directly to the flash chip with a programmer. Check the hardware version on the label under the device before flashing, since firmware for another revision may not boot. Keep a copy of the original flash contents, which hold calibration and MAC data.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 13 Feb 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 9 Jul 2020 | Open file on RM Schematics |
| @one5technology | 21 Nov 2020 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @skclappybios | 10 Apr 2024 | Open file on RM Schematics |
| @schematics_bios | 27 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →