BIOS firmware for a Thomson device identified by the code IN-SE133B_VD2, with a date of 2020-01-05 in the name, packed in a 3.87 MB RAR. The file is described as a working, fully tested BIOS. Such dumps are normally written to the SPI flash chip with a hardware programmer like a CH341A when a unit will not boot or its firmware is corrupted. Read and save the original chip contents first, confirm the dump size matches the flash capacity and check the board code before writing anything.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 11 Sept 2023 | Open file on RM Schematics |
| @generalbios | 12 Oct 2023 | Open file on RM Schematics |
| @generalbios | 15 Oct 2023 | Open file on RM Schematics |
| @generalbios | 19 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
| @generalbios | 29 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Nov 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →