Firmware dump for the TP-Link TL-MR100 router, EU version, hardware ver 1.0, marked as a 4 MB flash image and packed in a 3.81 MB ZIP. Such a full image is typically written straight to the SPI flash chip with a programmer to recover a bricked router that no longer boots. Read and keep the original chip contents first, because they hold calibration and MAC data unique to the unit. Check that the label on the router shows the same region and hardware version.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (11)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 23 Sept 2023 | Open file on RM Schematics |
| @generalbios | 4 Oct 2023 | Open file on RM Schematics |
| @generalbios | 6 Oct 2023 | Open file on RM Schematics |
| @generalbios | 8 Oct 2023 | Open file on RM Schematics |
| @generalbios | 9 Oct 2023 | Open file on RM Schematics |
| @generalbios | 13 Oct 2023 | Open file on RM Schematics |
| @generalbios | 15 Oct 2023 | Open file on RM Schematics |
| @generalbios | 19 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
| @generalbios | 29 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Nov 2023 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →