Flash dump for the Toshiba 24P1300ZE television, read from a Winbond W25Q16 SPI chip, which is 16 Mbit or 2 MB and matches the file size. The file has no extension but is a raw binary image. It is meant to be written back with a programmer such as a CH341A to repair a set that is dead, stuck in standby or boot-looping. Check that the board actually carries a 25Q16-class chip, save the existing contents, then erase, write and verify. Settings like the panel or remote may need adjusting afterwards.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_bin_file. Enginerys does not host this file.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →