Mainboard flash image for the Toshiba 32PB200E1 television, read from a 25Q16CV serial flash IC, a 16 Mbit part that matches the 2 MB file size. It is used to restore software on a set that will not start, stays in standby or loops at the logo. Write it with an SPI programmer after reading and saving the existing chip, then verify. Make sure the IC on your board is a 25Q16-class device of the same capacity, as a mismatched image will not program or boot correctly.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_bin_file. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →