Firmware dump for the Toshiba Satellite L600 on Quanta board DATE2DMB8F0, revision F. The DA prefix with the MB code is the standard Quanta pattern, where TE2 identifies the project. Packed as a 1.73 MB RAR archive, it is used to recover a laptop that will not post after a failed update or flash corruption. Write it with an SPI programmer after saving the original chip, and verify the revision F marking on the PCB, since other revisions may need different firmware.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (10)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 2 May 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 8 Jul 2020 | Open file on RM Schematics |
| @one5technology | 21 Nov 2020 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @skclappybios | 10 Apr 2024 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 27 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 27 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →