EDID data for the Toshiba LTD141EA0V 14.1 inch LCD panel, a 128 byte binary that matches one base EDID block. The image describes the panel identity, native mode and timings read by the system over DDC. Rewriting it helps when an older laptop screen stays blank, is not detected or runs at the wrong resolution because its EEPROM content was lost. Confirm the model printed on the panel label, save whatever the chip currently contains and program it with a suitable I2C tool or EDID editor.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →