Firmware dump for the Toshiba 40PB10ZE HD television, main board card number V28A001308A1, provided as a 4.00 MB raw BIN image. A file of this size is meant for a 4 MB SPI flash chip and is written with an external programmer. It is used to fix logo hangs, standby faults or no-picture problems caused by corrupted software. Check that the board code on your set matches, since panel settings in the dump may differ between models, and save the existing chip contents first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →