Toshiba Satelite L840 i3 2nd DABY3CMB8E0 REV E main

BIOS .bin 4.00 MB Shared

Main BIOS dump for a Toshiba Satellite L840 fitted with a second-generation Core i3, on Quanta board DABY3CMB8E0 revision E. The 4.00 MB binary holds the main system flash contents, with a separate KBC file existing for the keyboard controller. Quanta uses the DA-prefixed numbering, so check the PCB label and revision letter before flashing. Program it with an SPI programmer after saving the original chip, and make sure the flash capacity is 4 MB so the image fits exactly.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files