TOSHIBA TECRA R950 FAL2SY2 A3245 A BIOS OK

BIOS .bin 8.00 MB Shared

BIOS dump for the Toshiba Tecra R950, board code FAL2SY2 with reference A3245A, marked as working. The 8 MB size corresponds to a 64 Mbit SPI flash chip; if your board carries a different capacity, the image will not fit. Technicians use such a file to revive a board that will not post after firmware corruption. Read and store the original chip contents first, then program with a CH341A or similar tool and verify. Check that the FA code and A-number printed on the PCB match.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @schematiclaptopramkushwaha. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files