TOSHIBA Z30-A FAUXSY3 A3667A BIOS ok

BIOS .bin 16.0 MB Shared

Toshiba Z30-A BIOS image, marked working, with the board code FAUXSY3 and part reference A3667A taken from the name. Toshiba prints such FA codes and A-numbers on its own boards, and they are the reliable way to match firmware to hardware. The 16 MB size fits a 128 Mbit SPI chip. Back up the original chip with a programmer before writing, since it can carry serial and configuration data, and verify the result. Compare the codes on your PCB with those in the name before flashing.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @schematiclaptopramkushwaha. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files