Flash dump of 2 MB for the TP-Link TD-W8901N ADSL modem router, hardware version 1.0, labelled as read 1, meaning a first read taken from the chip. Router dumps like this restore a unit bricked by a failed firmware update when written directly to the SPI flash. Confirm the hardware version on the label underneath the device matches. The size fits a 16 Mbit chip; compare multiple reads for consistency and note the image may contain the source unit's MAC address.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →