Firmware dump for the TP-Link Archer C60 v3 wireless router, an 8.00 MB raw BIN marked as tested. A full image of this size typically matches an 8 MB SPI flash chip and is used to revive a router bricked by a failed update, written directly with a programmer such as a CH341A. Read and keep the original chip first, because it holds the MAC address and radio calibration data unique to each unit. Confirm the hardware version on the label reads v3 before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →