Firmware dump for a TP-Link wireless router referenced as model W8151N, hardware version 3.1, stored on a Winbond W25Q16 flash, a 16 Mbit chip. The long hex string in the name looks like a device identifier or MAC-related value, so treat the image as tied to a specific unit. Packed as a 1.26 MB RAR, it is used to recover a bricked router by reprogramming the SPI chip with a programmer. Verify the hardware version on the label, back up the original chip, and update the MAC address and calibration data if needed.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 7 Sept 2020 | Open file on RM Schematics |
| @biositechyangiyer | 10 Sept 2020 | Open file on RM Schematics |
| @biositechyangiyer | 22 Sept 2020 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →