Flash dump for the TP-Link TD-8811 ADSL modem, hardware version 5.2, taken from an EN25F series chip in an SO8 package, with 16 in the name likely referring to its capacity. Packed in a 1.77 MB RAR archive, the image is intended for direct programming of the SPI flash on a unit that fails to boot or is stuck in a loop. Use a clip or desolder the chip, read and keep its original contents, verify the image size matches the chip, and make sure the label shows version 5.2 before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (11)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 13 May 2020 | Open file on RM Schematics |
| @biositechyangiyer | 19 May 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 8 Jul 2020 | Open file on RM Schematics |
| @one5technology | 21 Nov 2020 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @skclappybios | 10 Apr 2024 | Open file on RM Schematics |
| @schematics_bios | 27 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 27 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →