Flash dump from a TP-Link TD-8901N ADSL router, hardware version 2.0, built around the Ralink RT63365E chipset, provided as a 2.78 MB RAR archive. A full dump includes the bootloader, firmware and configuration, so it can revive a router that no longer boots or loops on startup. It is usually written to the flash chip with an SPI programmer. Check the hardware version on the label first and save the original flash contents, since calibration data and MAC address are device specific.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 23 Dec 2018 | Open file on RM Schematics |
| @biosarchive | 23 Dec 2018 | Open file on RM Schematics |
| @IT_SERVICE_WORLD | 29 Oct 2019 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 31 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →