Flash dump for the TP-Link TD-8910G modem, hardware version 6, from a 25Q16 type serial flash and marked as good, meaning it was reported working. A 25Q16 part holds 16 Mbit, so the unpacked image should be 2 MB. The usual task is restoring a unit that no longer boots by writing the chip directly. Read and save the existing chip content first, choose the exact chip manufacturer in the programmer software, then write and verify before reconnecting power to the board.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 23 Dec 2020 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →