Firmware for the TP-Link TD-W8101G ADSL modem router, hardware version 3.0, supplied as a 1.22 MB RAR archive. Router firmware must match the hardware version printed on the device label, since images for other versions can brick the unit. It can be used to recover a router through its web interface or, for a raw dump, by writing the flash chip with a programmer. Back up the original flash first, as it holds calibration and MAC data.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 10 May 2021 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →