Firmware dump for the TP-Link TD-W8151N wireless ADSL router, hardware version 3.1, read from an EN25QH16 SPI flash, a 16 Mbit (2 MB) Eon part, and marked as working. Technicians write such a dump with a CH341A or similar programmer to recover a router left bricked by a failed update. Read and keep the current chip contents first. Confirm the hardware version on the label matches 3.1, because firmware for different TP-Link hardware revisions is usually not interchangeable.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (9)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 17 Sept 2020 | Open file on RM Schematics |
| @biositechyangiyer | 22 Sept 2020 | Open file on RM Schematics |
| @biositechyangiyer | 5 Oct 2020 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @schematics_bios | 27 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →