Firmware dump for the TP-Link TD-W8901N modem router, version 1.0, taken from a Winbond W25Q16 chip, with a 20161107 date stamp included in the name. The W25Q16 is a 16 Mbit serial flash, so expect a 2 MB image after extraction. Used for reviving bricked units by programming the chip directly with a CH341A or similar tool. Clip on in circuit or desolder the chip, read and store the existing contents, then write and verify; afterwards check the MAC address matches the sticker.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 23 Dec 2020 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →