Firmware dump for the TP-Link TD-W8951ND ADSL modem router, hardware version 5.1, read from a Winbond W25Q16 chip in SO8 package and marked as tested. The W25Q16 holds 16Mbit (2MB), so the image should match that size. Use it to unbrick a router that is stuck in a boot loop or has failed a firmware update by programming the chip with an SPI programmer. Check the hardware version on the label, and back up the original chip, which may contain the MAC address and calibration data.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 18 Jan 2024 | Open file on RM Schematics |
| @generalbios | 11 Feb 2024 | Open file on RM Schematics |
| @bios_files_Request | 7 Apr 2024 | Open file on RM Schematics |
| @bios_files_Request | 7 Apr 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →