Firmware for the TP-LINK TD-W8961N router, UN region, four-port version, hardware revision 2.0, marked as tested and working. A dump like this is typically written to the router's SPI flash with a programmer when the device is bricked and no longer accepts updates through the web interface. Check the hardware version on the label under the unit, since firmware for other revisions may not boot. Read and save the original flash before writing, and confirm the image matches the chip size.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 11 Dec 2023 | Open file on RM Schematics |
| @generalbios | 17 Dec 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →