Firmware package for the TP-Link TD-W8961N ADSL modem router, covering hardware versions 2.0 and 3.0 and marked as tested and working. Delivered as a 1.87 MB RAR archive, it is typically used to recover a router stuck in a boot loop or bricked after a failed upgrade, either through the web interface or by writing the flash chip directly. Check the hardware version on the label under the unit first, since images for different revisions are not always interchangeable, and keep a backup of the existing flash.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (9)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 8 Dec 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 8 Dec 2020 | Open file on RM Schematics |
| @biositechyangiyer | 23 Dec 2020 | Open file on RM Schematics |
| @nityatechnology2020 | 29 Jul 2021 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @skclappybios | 10 Apr 2024 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →