SPI flash image for the TP-Link TL-WA5210G outdoor access point, hardware version 1, read from a Winbond W25Q32 chip at location U24. The W25Q32 holds 32 Mbit, equal to 4 MB, which the unpacked dump should match. Repairers write such images with a CH341A or similar programmer to recover units stuck in a boot loop or bricked by a bad upgrade. Keep a copy of the original chip first, because it holds the unit's own MAC and wireless calibration data that a donor image replaces.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 23 Dec 2020 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →