Firmware dump from a TP-Link TL-WA7510N outdoor wireless unit, version 1, taken from a Spansion FL032PIF flash chip marked U6 on the board. The FL032P family is a 32 Mbit serial NOR flash, so the image should be 4 MB once unpacked from the RAR. A complete chip image restores bootloader, firmware and radio calibration in one step when the unit no longer boots. Save the existing chip contents before programming, and check the hardware version on the device label matches v1 before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 23 Dec 2020 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 27 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →