Full SPI flash image for the TP-Link TL-WR841ND router, hardware version 5.3, board revision 1.0, read from a Spansion S25FL032A chip at position U20. The S25FL032A is a 32 Mbit (4 MB) serial flash, so the extracted image should match that capacity. Technicians use dumps like this to revive routers with a broken bootloader that cannot be fixed over TFTP or serial console. Desolder or clip the chip, back up its current contents, then write and verify with a programmer that supports Spansion parts.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 23 Dec 2020 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 27 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 31 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →