Firmware dump for the TP-LINK TL-WR850N V1 router, version 0.9.1 build v028, based on the MediaTek MT7628NN SoC and taken from a 25Q64CSIG SPI flash chip, archived at 7.44 MB. A full chip image like this is used to recover a bricked router by writing it back to the 64 Mbit flash with a programmer. Read and save the original chip contents first, since calibration data and MAC addresses live in the flash, and confirm the image size matches the 8 MB chip capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 5 Sept 2023 | Open file on RM Schematics |
| @generalbios | 12 Oct 2023 | Open file on RM Schematics |
| @generalbios | 15 Oct 2023 | Open file on RM Schematics |
| @generalbios | 19 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
| @generalbios | 29 Oct 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →