BIN firmware of 4.00 MB for a MEWE-FT3200GH television, built around the TP.SK108.PB818 mainboard. TP-series universal TV boards rely on dumps matched to both board and panel, so the PB818 suffix matters as much as the board code. A raw image like this is written with an SPI programmer to revive a set that is stuck at standby or fails to display. Before flashing, check the board printing against the name, back up the original flash, and make sure the chip size equals 4 MB.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @led_software. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →