USB update firmware for the TP.SK535T.PB802 TV mainboard, packed in a 1.08 GB ZIP archive. The name gives the board code but not the TV brand or panel. Such packages are normally copied to a USB stick and loaded through the board's update procedure to recover a set stuck on logo or boot loop. Check that the board code on the PCB matches, and be aware that panel resolution and settings must suit your screen, or the picture may be wrong after flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tvcodeservice. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @tvcodeservice | 25 Oct 2026 | Open file on RM Schematics |
| @tvsoftwareworld | 25 Oct 2026 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →