Firmware dump of 4 MB for a TV mainboard identified as TP.VST59S.PB813, with a 1366x768 panel resolution and Supra branding, and the name marks it as working. This kind of image is written to the board's SPI flash with a programmer such as a CH341A to cure boot loops, a dead set or wrong panel settings. The panel resolution must match the screen fitted. Read and save the original chip contents before writing, and check that the flash chip capacity equals the 4 MB file size.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →