Firmware dump for the TP-Link Archer C50 router, hardware version 4, supplied as a 7.10 MB ZIP archive. A full flash image like this is used to recover units bricked by a failed update or corrupted bootloader by writing the SPI chip directly with a programmer such as a CH341A. Check that the hardware version on the label matches v4, back up the existing chip contents, and make sure the image size equals the chip capacity. Restoring a full dump can also overwrite the MAC address and calibration data, so keep your original.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 7 Dec 2023 | Open file on RM Schematics |
| @generalbios | 17 Dec 2023 | Open file on RM Schematics |
| @generalbios | 14 Jul 2024 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →