Firmware for the TP-Link TD-W8960N router, hardware version 4.0, marked in the name as tested and working. It is packed in a 5.23 MB RAR archive. A dump like this is used to recover a router left with no boot after a failed update, either by writing it to the flash chip with a programmer or by loading it through a recovery method if the bootloader still runs. Check the hardware version on the label under the router before flashing, because images for other versions are not interchangeable. Keep a copy of the original flash first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 6 Mar 2023 | Open file on RM Schematics |
| @L9BCM2MdAgNjNDk1 | 4 Apr 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →