Firmware package for the TP-Link TD-W8961ND wireless ADSL modem router, hardware version 3.1, packed in a RAR archive of about 1.3 MB. TP-Link firmware is tied to the hardware version printed on the label under the device, so check that it says V3.1 before flashing. Such files are used to recover a router stuck in a boot loop or bricked by a failed update, either through the web interface or by writing the flash chip directly with a programmer. Save the existing flash contents first whenever possible.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 23 May 2021 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 27 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →