Firmware dump for the TP-Link TD-W8970 router, hardware version 1.2, with board number 2011500124 rev 1.0, in a 7.11 MB RAR. The larger size suggests a full chip image or several files, so check the contents before use. Use it to restore a bricked unit by programming the flash chip directly with an SPI programmer. Save the original chip contents first, since radio calibration and MAC data are unique to each unit, make sure the hardware version on the device label matches, and check the image size against the chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 14 Nov 2020 | Open file on RM Schematics |
| @biositechyangiyer | 2 Dec 2020 | Open file on RM Schematics |
| @biositechyangiyer | 1 Feb 2021 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →