Firmware for the Gigabyte TRX40 AORUS PRO WIFI motherboard, revision 1.0, version F4c, prepared for a 16MB flash chip. Supplied as a RAR archive, it is intended for direct programming of the SPI BIOS chip when the board is bricked or stuck in a boot loop and Q-Flash recovery is not possible. Use a clip or remove the chip and write it with a programmer such as a CH341A. Confirm the revision on the PCB, keep a backup of the original dump, and check that the image size matches the 16MB part.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →