SPI flash dump for the CCE Stile D4201 television, taken from a W25Q32BV Winbond chip; at 4 MB it matches that 32 Mbit device exactly. Writing it back with an external programmer is a common fix for sets that hang on the logo, reboot continuously or show corrupted menus. Before flashing, back up the existing chip contents, verify the chip type on the main board and confirm the board version matches, because a mismatched image may set the wrong panel parameters or fail to boot.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @oficinacomputadores. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →