Small 128 KB binary for the Samsung UA32J4100AR television, given its model name. At this size it is most likely an EEPROM dump, often holding configuration, panel settings or a dump from an I2C memory chip, instead of the main firmware. Technicians write such files with a programmer to fix faults like boot loops, wrong panel settings or a set that will not leave standby. Verify the chip type and its capacity on the board, and read out the original data before overwriting.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @led_software. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @led_software | 19 Jan 2019 | Open file on RM Schematics |
| @gunvantrathore | 27 Dec 2019 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →