BIOS image of 32 MB in raw .bin form, named to indicate a password-removed version marked as tested and working; no brand, model or board number is stated. Dumps like this are used to clear a supervisor or BIOS password by reprogramming the SPI flash with an external programmer. Because the source device is unknown, only write it to a board whose original firmware it was derived from. Save a full read of the original chip first and confirm the target is a 256 Mbit flash matching the 32 MB size.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @vinafix_bios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →