Firmware for the ASUS VivoBook S14 S406U and X406UA laptop, mainboard revision 2.0, marked as a fixed 8 MB image and stored in a 5.51 MB RAR. The fixed label suggests the dump was corrected or confirmed working, and the 8 MB size should match a 64 Mbit SPI flash chip. Write it with a hardware programmer when the board will not boot. Keep a backup of the original chip contents and confirm the revision printed on the PCB is 2.0 before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →