Firmware image labelled for the Dell Vostro V13, a 2 MB raw binary, likely a full SPI flash dump. The name gives no revision, version or tested status, so verify it before writing. Use a programmer such as a CH341A or similar with clip or desoldered chip to restore a board that will not start because of corrupted BIOS. Always save a backup of the existing chip contents first, and make sure the 2 MB image matches the capacity of the flash chip fitted to the motherboard.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →